English Deutsch French Español Italiano
Accueil | Documents | Boutique en ligne | Photos & Rapports | Support
Page d'accueil » Catalogue » Antennes filaires » AE80702-R2 Panier | Caisse
Catégories
 Antennes Yagi kits
 Service assemblage
 Antennes filaires
 Mâts Fibre de Verre
 Mâts Aluminium
 Matériel haubanage
 Accessoires & Bricolage
 Pièces de Rechange
Panier
Vous n'avez pas encore d'article dans votre panier.
Devises  
USA DISTRIBUTOR
Please visit our exclusive distributor for USA & Canada:
www.spiderbeam.us
Aerial-51 Model 807-HD R2 (Amerique)
Aerial-51 Model 807-HD  R2 (Amerique)
Aerial-51 Model 807-HD  R2 (Amerique)
Aerial-51 Model 807-HD  R2 (Amerique)


HEAVY DUTY Asymmetrical Dipole, 7 HF Bands +6m; (+30m with tuner/reduced performance):

 

80m

40m

30m

20m

17m

15m

12m

10m

6m

SWR (typical)*

< 1.8

< 1.5

< 8

< 1.6

< 1.6

< 1.5

< 2.7

< 1.5

< 2.2

Maximum Power SSB / CW

600w

600w

150w with tuner

600w

600w

600w

600w

600w

600w

*SWR averages near resonance. SWR varies slightly with height and from one location to another. 80m resonance is mid band (IARU Region One).
Tuner required to cover full 80m band. SWR rises towards band ends. Depending on the transceiver's requirements, an antenna tuner may be required on some bands. DO NOT EXCEED POWER LIMIT ON 30m.


Antenna length: approx. 40.8m (134 ft.)
Antenna weight: only approx. 800g (1.5 lb.)
Nominal height: 12m (40 ft.) or higher.

Ce paquet contient le RMU pour la Région 2 (Amérique)


FOR HORIZONTAL ANTENNAS, HEIGHT = MIGHT!

www.aerial-51.com has developed a new antenna concept for combining lightweight wire antennas with lightweight telescoping fiberglass poles, enabling rapid deployment of efficient antennas (within minutes), at heights previously unobtainable with portable products.
Users of the popular Model 404-UL antenna requested an 80m version and Spiderbeam responded with the Aerial-51 Model 807-HD wire antenna. Our 807-HD (heavy duty) uses strong CQ-532 wire for permament installations.

The 807-HD was designed with the same focus on material quality as the other Aerial-51 antennas. It uses insulated, stranded copper-clad steel wire with a breaking strength of 50 kg, and a Teflon-insulated SO-239 coax jack with gold contacts. The Hybrid Balun and RMU are the same as used in the 807-L portable version, but in this heavy duty version the Balun is also potted with Epoxy for better weather protection. This combination of Balun and RMU optimizes resonance of the antenna on all bands, while assuring the antenna and feedline are not plagued with problems caused by common mode current, as most competitive OCFD products are.

Feel free to download the manual here and the technical datasheet with SWR curves here

Installation may be as ‘Inverted-V’ or ‘Flat-Top-Dipole’, but the balun and feedline should always be mounted to a support such as fiberglass pole, aluminum mast, or tree. There is no specific required length of coax. Use any 50 Ohm coax with the antenna, but do not use too heavy of a coax to run up a thin fiberglass pole.


For portable DX-pedition use, Spiderbeam also offers the special Model 807-L (special lightweight version, on request only / +50 Euro).
It is the same as the 807-HD but uses thinner wire like DXW-UL. (lead time for production of the special lightweight version is 10 weeks)

If you have any questions about installation, consult Spiderbeam: Info@Spiderbeam.com.






Disponible dés maintenant sur shop.spiderbeam.com »
301: Vous pouvez trouver ce produit ici dans la nouvelle boutique - https://shop.spiderbeam.com/de/shop/?search=Aerial-51 Model 807-HD R2 (America)&order=name+asc »


Conditions commerciales | Avertissement | Protection des données | Livraison | Retours | Paiement | Contact | 

Site Encrypted by GeoTrustSSL Secure Credit Card Payments by Saferpay Site Verfied by SiteLock

IBAN International Bank Transfer Master Card PayPal Homepage-Sicherheit

Website by: OCTIC

Parse Time: 0.035s